Bianchi Serial Number Decoder

Posted By admin On 16.09.21

HOW OLD IS MY BICYCLE?

‘How old is my bicycle?’ is a question I get asked a lot, nearly as much as: ‘I have a bicycle that looks like one of yours; if I send you pictures please can you identify it for me?’

Beginners: 40: 10 Aug 2020: M: Bianchi serial numbers LS285709: Vintage & Classic Bikes: 7: 17 Nov 2018: N: Giant Roam - serial number: General Cycling Discussions: 2: 20 Oct 2018: Dating a Raleigh Siren Series 1 from its serial number: Vintage & Classic Bikes: 6: 15 Aug 2018.

The answer, in short, is that I do not have time to tell you either. I’m not being callous about this. With an estimated 15,000 bicycle manufacturers, the odds are stacked against me recognizing yours; in any case, I do not claim to be an expert, just an assiduous recorder of information. To sift through information to try and find similar pictures to your unidentified bicycle would take me months, and I’m already doing similar research on my own bikes. Not only do I have a full-time job (I run my own business restoring and selling vintage vehicles) and am a hands-on parent of a young child, but I spend a minimum 30 hours every week building, updating and maintaining these free websites to help you do your own research. My hobby usually takes a backseat. Insomnia is my saving grace, otherwise there would be no time for any of this.

My purpose for creating these databases is simple. In the ‘old days’ (a time which seems to have ended in the past twenty five years or so), a youngster became an apprentice in a chosen field and learned its history from the older employees. Thus, for example, an apprentice mechanic was handed down an invaluable unwritten guide to repairing vehicles that could not be learned at college nor from books, because, as well as specific information about various models, it helped a youngster understand the way they were designed and built.

Similarly, to learn about vintage bicycles, we ask questions of our elders in the hobby. The key point here is that the elders who were around while our favourite vintage machines were still on the road are no longer with us, the last of them having passed on in the past thirty years or so. Now we must depend on those who gleaned that first-hand knowledge from them; these chaps were the ‘youngsters’ then, but now they’re getting older themselves, most in their seventies and eighties. They don’t usually use computers, so much of their knowledge is stored in their heads. By the time we learn from them, it’s second-generation information. My contemporaries and I are in a younger age group – forties to sixties – and we’re busy learning and recording what we can before it’s lost forever. We study 100-year-old magazines to see when certain new innovations were first reviewed (it helps us date bicycles with similar features), read correspondence of the time to try to understand contemporary views and opinions, research old catalogues, meet fellow enthusiasts, help each other with restorations, ride our old bikes as much as possible, and work with our elders to pick up tips and wisdom.

If you can help in any way by contributing to this research, please get in touch. My email is embedded in the picture below.

By recording and sharing this knowledge while it’s still as fresh as possible, our fabulous vintage hobbies will continue for centuries to come.

TO FIND OUT HOW OLD YOUR BIKE IS – JOIN THE VETERAN CYCLE CLUB!

Although we are in the so-called ‘Information Age’ and the internet provides a surplus of it – some of it accurate, much of it misleading – there is nowhere near enough information on vintage bicycles. This surprises many people. Sometimes, folks with no experience of the vintage hobby who may have recently unearthed an old bicycle contact me and demand that I immediately tell them what it is, how old it is and what it’s worth. I try to explain as politely as possible that such a service does not exist, and they are often abusive as a result. Usually they want me to identify it so they can sell it on ebay. Luckily, I remembered an old Sufi saying, ‘Only explain things to people in a language they understand.’ So now I answer that such a service, which will obviously increase the value of their unidentified machine, will cost them £50 + VAT. It’s still not a service I actually offer – but at least they are less abusive.

The question remains: ‘How old is my bicycle?’ Also, ‘I have a bicycle that looks like one of yours; if I send you pictures please can you identify it for me?’

The answer is simple. The Veteran Cycle Club (V-CC) has a system of ‘marque enthusiasts’ – volunteers who compile what information they can about particular manufacturers. By joining the V-CC you can access whatever information is available. If that doesn’t help, if it is interesting enough, you might be able to send pictures of it to the the V-CC magazine, or take it to vintage shows and ask exhibitors, or keep an eye on ebay to see if something similar ever comes up. Identifying an unknown bicycle is hard work. You may be lucky, but more than likely it will remain a mystery.

Car eats car 2 hacked. As I have stated before, the V-CC archives and Ray Miller’s Encyclopaedia are invaluable resources: these ongoing projects are becoming the world’s primary source of information on vintage bicycles. The V-CC’s system of marque specialists is unrivalled throughout the world. I recommend every vintage bicycle enthusiast to join the V-CC to access these (and many other) excellent facilities.

FRAME NUMBER DATING

Bicycles that can be dated with 100% accuracy are the exception. Marque enthusiasts use records of shop ledgers that recorded dates sold and frame numbers, and then calculate the ages of other bicycles by comparing them with known frame numbers. Sometimes the date sold does not reflect when a bicycle was actually manufactured (for example, Dursley Pedersens were very expensive, badly marketed and often took a long time to sell). Only certain manufacturers’ frame number sequencing is known. Many did not use chronoligical sequences.

Many manufacturers used ‘bought-in’ bikes at different times, ie made by a different company. This happened in particular in the 1890s when frame styles changed every few years. Frames made by top companies with the old designs were sold off through the trade, so smaller companies then sold bicycles using the old frames with different parts years after!

The records of the majority of the smaller companies no longer exist: you’d be surprised how fast the entire history of a company disappears once the factory closes. There were also a lot of ‘dodgy practices’ within the bicycle trade, with companies regularly liquidating and starting up again and spurious production claims often made for advertising purposes and to inflate a company’s worth. Few published their true production figures. It’s a nightmare trying to make sense of it a hundred years later.

A catalogue description is a good guide, though we rarely have a manufacturer’s catalogue for every year, so may not know for how many years a model was current. Also, though we now consider a catalogue description to be an accurate guide to a bicycle’s specification, despite the catalogue options listed a customer could choose any option whatsoever, even components sold by a competing company.

It’s possible to date Sturmey-Archer hubs, so if the rear hub is original to the bike that often helps.

Bear in mind that owners often updated their bicycles over the years; though we might like our bike to match its catalogue description, updated parts are also a valid part of its history and provenance.

Details of the following manufacturers have been published, so I hope this page can provide an easy reference point. I’ll add to it as I find more.

RALEIGH FRAME NUMBER DATING

MY NOTES:

1.The Raleigh Heron Head transfer was introduced in 1908. In the same year, mudguards received a forward extension.

2. Raleigh’s ‘R’ lamp bracket was superseded in September 1927 by the heron lamp bracket (see below). The company had been taking steps to make it harder for makers of cheap bicycles to copy Raleigh parts. The ‘R’ bracket was easy to copy, so they introduced this more complex lamp bracket instead.

Consult the list below to help remember when these companies were still ‘original’ before being taken over by Raleigh:

Humber 1932

Triumph 1932

Bianchi

Rudge-Whitworth 1943

Three Spires 1954

BSA , New Hudson, Sunbeam 1957

Phillips 1960

Hercules 1960

Norman 1960

Sun 1960

Carlton 1960

RUDGE-WHITWORTH FRAME NUMBER DATING

Production has been attributed as follows, with frame numbers as at 31 July each year:

1898, 70,000;

1900, 118,200;

1901, 140,754;

1902, 169,739;

1903, 210,950;

1904, 223,672;

1905, 272,991;

1906, 350,235;

1907, 427,114;

1908, 488,139;

1909, 538,390;

1910, 585,010;

1911, 626,400;

1912, 663,066;

1913, 697,524;

1914, 726,731;

1915, 740,862;

1916, 745,621;

Where to find bianchi serial number

1917, 749,192;

1918, 751,213;

1919, 755,622.

SUNBEAM FRAME NUMBER DATING

1909 = 96,739 (declared)

1910 = 101,700 (calculated)

1911 = 106,700 (calculated)

1912 = 111,642 (declared)

PREMIER FRAME NUMBER DATING


BEESTON HUMBER FRAME NUMBER DATING

ELSWICK HOPPER FRAME NUMBER DATING

SINGER

The following dated bicycle frame numbers from the Singer Car Club (not guaranteed):

1903 – 142069

1903 – 172676

1905 – 184483

1908 – 225451

1909 – 232178

TRIUMPH

I started to collate frame numbers from 1890s-1920 Triumph bicycles, and will update it as I go along. You can see it at the new Triumph Bicycle Museum

GERMAN NSU BICYCLES

(translated from German)

There’s no definite official information about part numbers and corresponding registration years. This data is approximate. With an accuracy of + / – one years, but they are assumed to be relatively safe.

1900 ~ 7000
1910 ~ 18,000
1925 ~ 550,000
1929 ~ 675,000
1930 ~ 685,000
1931 ~ 692,000
1932 ~ 700,000
1933 ~ 720,000
1934 ~ 770,000
1935 ~ 920,000
1936 ~ 1,000,000

1937 ~ 1.200.000

1938 ~ 1,300,000

1939 ~ 1,450,000
1940 ~ 1,550,000
1941 ~ 1,650,000
1942 ~ 1,700,000
1943 ~ 1,750,000
1944 ~ 1,800,000

1945 ~ 1,806,000

1946 Renumbered: Prewar numbers re-used. For example, 800,000 might be 1935 or 1956.
1947 ~ 55,000
1948 ~ 100,000
1949 ~ 175,000
1950 ~ 320,000
1951 ~ 420,000
1952 ~ 570,000
1953 ~ 650,000
1954 ~ 700,000
1955 ~ 750,000
1956 ~ 800,000
1957 ~ 900.000 to about 990.000

From 1957 / 990,000 Onwards: NSU used the same numbers as prewar again, so it’s confusing.

DATING FROM TORPEDO REAR HUBS

The best bet on post-1957 machines is to check the Torpedo rear wheel hubs. Since around 1920 they used a production stamp, with which they can be dated:

“36”, therefore stands for example for the production date in 1936; later, there were also some 1-digit numbers:
“5” or “55”, built in 1955
“6” or “56”, Built in 1956
“7”, built 1957
In 1958 there were also letters:
“A”, built in 1958
“B”, built in 1959
“C”, built in 1960
“D”, built in 1961

“E”, built in 1962

(Front hubs do not have date indicators)

STURMEY ARCHER DATING GUIDE

If you want further details of Sturmey Archer hubs, buy the superb book The Sturmey Archer Story by Tony Hadland, available through the V-CC.

THE INTRODUCTION OF CHROME: 1930

The cycle industry was an early adopter of the new chrome process, and chrome was first used on bicycles in 1928.

Maurice Selbach is believed to have been the first British manufacturer to have used it in 1928 (see extract from his 1929 catalogue, below)

Shelby was one of the first US manufacturers to use chrome; their 1928 ‘Lindy’ model had a mixture of chrome and nickel.

It was offered as an option in 1930 by various British manufacturers (see extract from 1930 Raleigh catalogue, below) and by BSA in 1931 (I don’t have a copy of the BSA 1930 catalogue to check). Catalogues were generally printed the year before the season indicated in a catalogue. By 1933 it had become widely used.

If you want to date a vintage bicycle and it has chrome parts, it is generally accepted that it would have been made from 1930 onwards, or updated if made earlier.

WHEEL RIM DIMENSIONS

Here’s a handy 1911 reference guide for the rim dimensions on 26″ and 28″ wheels, both wired-edge and beaded-edge.

I’ve also reproduced the following wheel and tyre guides on the tyre page, but it may be useful to have all this reference stuff on one page.

Where To Find Bianchi Serial Number

MODERN TYRE SIZES

Bicycle tyre sizes are so confusing! Vintage motorcycle tyres are logical, those for cycles are not. Here’s a chart to help…

Some time ago, I asked John and Sue Middleton why they sold their wonderful bicycle museum in Camelford, Cornwall. They explained they’d always been upset that they received little support from fellow enthusiasts or vintage cycle clubs. But the turning point was apparently an incident when a visitor parked his car right in front of the entrance, and a big argument ensued when John tried to get him to move it. The driver insisted he had the right to park wherever he liked. I suppose ‘the great British public’ is an animal best avoided if you don’t have a thick skin, because statistically you’re eventually going to meet every sort of person in such circumstances.

I belong to many vintage clubs, but I refuse to have anything to do with their politics. Hobbyists, by definition, are eccentric (myself included): put more than one in a room together and the outcome is unpredictable. I support clubs because they help our hobby. I have wonderful friends within the hobby. I keep the two separate. I actually do spend an inordinate amount of time answering emails and phonecalls regarding obscure anomalies of our cycling and motorcycle history (I’m also a Veteran Motorcycle Club marque specialist). The questions I respond to are generally tricky ones that can’t be easily answered by the V-CC, those from fellow enthusiasts who have a similar machine to one of my own, and folks who need help with stuff left to them from enthusiast dads who have passed away. But, like other volunteers, there’s only so much time in the day to dedicate to our hobbies, and as much as I love vintage vehicles, I also have a fabulous life outside the hobby that takes priority. Good luck researching your bicycle …and I hope you continue to enjoy these websites 🙂

NSU DATING thanks to – http://www.fahrrad.nsu24.de

Here is an email I got from an actual employee of GT:

If the bike frame was manufactured at the Santa Ana CA facility, the first three or four digits of the serial number should be letters abbreviating the model or size of the frame such as 'XL', 'XXL', CR24, or something like that.

The next part of the serial number is eight numeric digits. The first four numbers should be a two digit month followed by a two digit year.

The last four digits are the serialization digits 0000 to 9999 depending on what number the frame was of the years production.

If the frame was made overseas in Taiwan, it gets more complicated. If the number starts with a K, the frame was made by Kinesis.

That's the only one I remember off the top of my head.

There were at least four companies in Taiwan that made the GT lines :

Robinson, Dyno, Powerlite and Auburn included)

The first digit would be a letter designating the factory that made the frame. There might also be a second letter digit specifying the factory that assembled the bike, if applicable. The model and year of production was also coded by a letter, so you won't be able to spot a two digit month and two digit year.
Before I left, I was writing a specification to standardize all of the serial numbers because GT was starting to send most of its US production to other US fabrication shops.
The information might also come in handy for deciphering other makes because the factories in Taiwan make bikes for a lot of different companies.
I am tinkering around with the idea of starting to make my own frames, kind of on a 'one-off' basis. I am also teaching welding at a local community college.
By the way, did I tell you that the guy ran GT's in house fabrication for the last ten years (he recently retired) was none other than Gilbert Axt. Who? Do you remember Race, Inc.? That was Gilbert.
He also did the original PK Ripper for SE Racing. History, man.
It might be a really cool thing if I can track down Gilbert now and interview him for you.
THAT is the kind of stuff that belongs in the BMX Museum!

Bianchi Serial Number Decoder Online

Later. I'll write you when I get a chance. Dan Garcia

Bianchi Serial Number Decoder

and here is the updates, thanks to love thegoose! (Michael S)
well we get a good bit of gt serials that could be identified by the owner, if they only had the tips that some of us have learned, so i will post what i know, and anyone with more knowledge can add to it.so here we go.
here is an example to go by. on the dropout you have 'M1' followed by '08922198'.this one is simple.
M1 stands for 'mach one' that is your model gt.
it can also be a 'I' for interceptor and so on.
next on the serial is '0892' this is easy to decode too,
08 means 8th month, which would be august.
then you have '92' next in the lineup, this would be 1992
the last 4 digits, are your build number, this one would be the 2,198th one built.
Here is another example. if your serial is KGCG2297 this one gets a little complicated. but still easy once you learn the code to it.
the first letter is who made the frame itself, in this case it would be 'Kenisis', an overseas company.this could be replaced by another letter but at least we know what that one is there for.
next is the letter 'G'.this isnt always there, but if so, this is where it was assembled, (ever notice the built in usa sticker on your gt or dyno?) this is what that letter is there for. it wasnt made here, but was built here.
next is the letter 'C'.C is the 3rd letter in the alphabet, and march is the 3rd month, so march is the build month.
next is the letter 'G' this is the year. G is the 7th letter in the alphabet,
so this would be a 1987.
here is one more.your serial resembles this:f6030578.
to start, if you have a 'baseball' looking stamp behind your serial, this frame was made overseas..no its not a pacific, so dont cry, or get mad..and lets continue.
on this serial, the first number is the last digit of the year, so 6 stands for 1986
next is '03'..this is the third month.which is march.
so you have a gt built in march of 1986.
but still use the museum as a guide to id the frame, cause sometimes you can find the year, but getting a posotive id on the model isnt possible without knowing which style frame you have.
this doesnt apply to new gt's, but hopefully some people with info on those will chime in. this isnt always going to match your serial, you may have a 'fake'.its not likely but it happens. also on earlier models this can differ. this is for the 2 most popular style serial's i see on here. also, common sense tells you that if you have a suspected 'gt' frame, look it up and compare it in the musuem, knowing which style frame you have will help with the process of id'ing your bike with the serial, especially if the serial has some damage that prevents you from getting the full number.
hopefully this bit of info can be used for everyone, and this will save you from those late nights sitting around waiting for a response to your post looking for an answer to the idendity to your gt..although i do feel smart and proud when i can answer these posts. well, thats it for me, if anyone else has info on serials or if you see a mistake in this guide, tell me so i can edit it. happy holidays people.